ナビ背景

LiFePO4 Battery Chargers

高品質 12.8V 90Ah LiFepo4 バッテリー
高品質 12.8V 90Ah LiFepo4 バッテリー

NO Item General Parameter Remark 1 Model GCLB-4F90 Single 2 Casing material for single cell Nickel plated steel   3 Standard capacity(0.2C5A) 90Ah   4 Rated voltage 12.8V 3.20V(Work voltage:3.20V) 5 Max.Charge voltage 14.6V 3.65V(Single Ave. charge Voltage) 6 Cut-off voltage 10V 2.50V(Single Ave. Discharge Voltage) 8 Standard charge current 45A 0.5C 9 charging Time About 5h   10 Max Continuous discharge current 90A 10C 11 Peak discharge current 90A 1C 10seconds 12 Battery dimension(mm) 305*167*210, 328*171*215   13 (Approx.)Total...

BMS LiFePO4 25.6V 300Ah バッテリーを搭載した工場出荷時
BMS LiFePO4 25.6V 300Ah バッテリーを搭載した工場出荷時

Item General Parameters Remark Rated Voltage 25.6V   Power 7680Wh   Rated Capacity 300Ah   Charge Cut Off Voltage 28.8±0.2V   Standard Charge Current 30A Adjustable Max Charge Current 300A Recommended Charge Cut off Current 0.1A Adjustable Discharge Cut off Voltage 20.0±0.2V   Standard Discharge Current 300±1A Adjustable Max Continuous Discharge Current 400±1 Recommended Impedance ≤60mΩ   Dimension Customized   Weight Customized   Working Temperature -20~55℃   Storage Temperature -40~55℃   Storage Humidity 5%~95%RH   Working Humidity ≤85%RH   Shell...

Flaw detector standby power design scheme
Flaw detector standby power design scheme

The flaw detector is a portable industrial non-destructive flaw detection instrument, which can quickly, conveniently, non-destructively and accurately detect, locate, evaluate and diagnose various defects (welds, cracks, inclusions, folds, pores, sand holes, etc.) inside the workpiece , can be used both in the laboratory and on the engineering site. The instrument can be widely used in manufacturing, iron and steel metallurgy, metal processing, chemical industry and other fields that require defect detection and quality control. Life assessment, which is a...

工場出荷時の長いサイクル寿命リチウム イオン 12.8V 120Ah Lifepo4 バッテリー
工場出荷時の長いサイクル寿命リチウム イオン 12.8V 120Ah Lifepo4 バッテリー

Specifications of our lifepo4 12.8V 120Ah module:   NO Item General Parameter Remark 1 Model GCLB-4F120 Single 2 Casing material for single cell Nickel plated steel   3 Standard capacity(0.2C5A) 120Ah   4 Rated voltage 12.8V 3.20V(Work voltage:3.20V) 5 Max.Charge voltage 14.6V 3.65V(Single Ave. charge Voltage) 6 Cut-off voltage 10V 2.50V(Single Ave. Discharge Voltage) 8 Standard charge current 50A 0.5C 9 charging Time About 5h   10 Max Continuous discharge current 120A 10C 11 Peak discharge current 150A 1.25C 5...

工場出荷時の12.8V 105Ah車のアイドリングストップバッテリー
工場出荷時の12.8V 105Ah車のアイドリングストップバッテリー

Advantages of 105Ah car start-stop battery: 1. Super long life The cycle life of lead-acid batteries is generally 250~300 times, and the cycle life of this lithium iron phosphate battery is about 3000 times. If the vehicle is parked for a long time without starting, the battery of the car will be exhausted, and the lead-acid battery will be scrapped. The lithium iron phosphate battery can still be used normally after charging without affecting its lifespan. 2. Ensure safety The...

12.8V 45Ah 大容量車用アイドリングストップバッテリー
12.8V 45Ah 大容量車用アイドリングストップバッテリー

Our lithium iron phosphate starter battery is composed of prismatic battery cells, which has more cycles and a longer lifespan than a lead-acid battery. With BMS protection, The battery has higher safety performance. And can start quickly to facilitate your needs.   Is your car battery stored correctly: The correct storage location is important: Long-term storage in poor conditions can cause deep discharge, which can irreversibly damage the battery. Therefore, special attention must be paid to the storage location and...