Что такое аккумулятор lifepo4? Давай посмотрим

Lithium Iron Phosphate Like other batteries, LiFePO4 batteries are made from electricity-generating electrochemical cells that power electrical devices. A LiFePO4 battery consists of a positive electrode, positive electrode, separator, electrolyte, positive and negative current collectors. The positive terminal of the battery is called the cathode and the negative terminal is called the anode. Anode terminal as Li-ion source. The electrolyte carries positively charged lithium ions from the anode to the cathode and vice versa through the separator. The movement of lithium ions generates free electrons in the anode. Thus, electrons will flow through the external circuit to the cathode, the positive terminal. So when there is an electrical load, current will flow from the positive terminal to the negative terminal connected across the battery. Batteries consist of concentric alternating layers of negative and positive electrode materials, with separator layers positioned between these layers. The battery is then filled with electrolyte, allowing ion conduction.

The manufacturing method for the cathode terminal must be able to release large amounts of lithium ions during battery operation. The most common cathode material is Licoo2, but this material has some disadvantages. Therefore, LiFePO4 can be used as a substitute for LiCoO2. More recently, anode terminals have been made from natural or synthetic graphite. However, with the advancement of technology, lithium titanate (LTO) has become a very promising anode material to replace graphite. The most commonly used electrolyte consists of lithium salts, such as LiPF6 in organic solution.

The next section discusses how LiFePO4 charge and discharge cycles work:

State of charge: positive electrode and negative electrode composed of lithium iron phosphate. Iron ions and phosphate ions form a grid, and lithium ions are loosely trapped. When the battery is charged, these lithium ions are pulled across the separator to the negative graphite electrode, which can trap and hold these crossed lithium ions. The membrane is made of a polymer (plastic) and has many small pores that allow lithium ions to pass through easily. The battery will be fully charged when all the positive lithium ions available in the cathode terminal reach the anode terminal and are correspondingly stored between the graphene layers.

 

Assuming four single-cell batteries in series, this converts the battery pack’s voltage to about 12 volts for analysis. LiFePO4 battery charging can be divided into two phases:

Constant current charging: In the first stage of charging, the current is kept constant, and the charging rate is 0.5C, which means the battery will be charged at half capacity. For example, when charging a battery with a capacity of 200Ah, the charge rate will remain constant at 100Amp.
During constant current charging, the charging voltage of the battery will slowly rise to a “sink” voltage of 14.4 V.
Saturation charging: Once the battery is 90% charged, that is, the absorption voltage is reached, the battery will enter the second charging stage, which is called saturation charging. At this point, the battery voltage remains constant and the current will drop steadily. 100% state of charge (SOC) is reached once the current has dropped to approximately 5% to 10% of the battery’s Ah rating.

Discharge state: As mentioned earlier, during the charging cycle of LiFePO4 in the battery, the positive lithium ions released from the positive electrode move to the negative electrode through the electrolyte and are stored there. When all available lithium ions have reached the negative terminal, the battery can be fully charged. When a rechargeable battery is connected to an electrical load, positive ions move through the separator from the negative terminal back to the positive terminal. At the same time, electrons flow through the external circuit, causing current to flow through the electrical load circuit, and the battery releases its stored energy. Electrons cannot flow through the electrolyte because of the insulating barrier (i.e., the separator). When the battery is fully discharged, all lithium ions are moved back to the lithium iron phosphate electrode.